Hardware
The "Hardware" section provides a comprehensive overview of the physical and technical elements that form the core of the CyperPRO device. This section allows for an in-depth exploration of the device's internal components and a better understanding of its technical specifications. You'll learn about the processor, memory, battery, communication modules, and other key components that make CyperPRO a unique device. Direct access to hardware information will assist users in gaining a deeper understanding of the device's potential and capabilities, ultimately leading to more effective and satisfying use of CyperPRO.
The Standard body
• Height: 96mm • Width: 118mm • Depth: 24mm • Weight: 155g • Material: ABS, Tempered glass
Colors
The Limited body
• Height: 96mm
• Width: 118mm
• Depth: 24mm
• Weight: 240g
• Material: Titanium alloy, Tempered glass
Colors
Buttons & Connectors
• Navigation buttons for movement in four different directions: up, down, left, and right. • Additionally, it features functional buttons X, Y, A, and B, • Select button, • Four status LEDs, • Sixteen GPIO outputs, • An infrared LED, • An SD card slot, • An SMA input.
Display
• Diagonal size: 2.8“ • Type: IPS TFT LCD • Resolution: 320x260 pixels • Controller: ST7567 • Interface: SPI
Battery
• Battery Type: LiPo • Capacity: 3650 mAh • Full Charge Voltage: 4.20±0.02 V • Standard Charge Current: 730 mA • Discharge Cut-off Voltage: 3.0 V • Operating Environment for Discharging: -10°C ~ 60°C • Estimated Standby Time: Approximately 14 days (may vary depending on usage) • Pack Weight (Approx): 63.0 g
MCU - Microcontroller unit
• Model: STM32WB55RGV6ARM • Application Processor: ARM Cortex-M4, 32-bit, operating at 64 MHz • Radio Processor: ARM Cortex-M0+, 32-bit, operating at 32 MHz • Wireless Capabilities: Bluetooth LE 5.4, 802.15.4, and proprietary protocols • Flash Memory: 1024 KB (shared between application and radio) • SRAM: 256 KB (shared between application and radio)
Wifi Module
• Module: ATWINC1500 • Standard: IEEE 802.11 b/g/n • Interface: SPI, I2C • Frequency: 2.4 GHz (2.412-2.472 MHz)
Bluetooth
• Bluetooth Version: Bluetooth Low Energy (BLE) 5.4 • Profiles Supported: Bluetooth LE 5.4, 802.15.4, and proprietary protocols • Operating Frequency: 2.4 GHz • Range: Typical Bluetooth BLE ranges apply, with variations based on environmental conditions. • Bluetooth LE 5.4: Supports the latest advancements in the Bluetooth Low Energy standard, including improved security and performance features. • 802.15.4: This is a low-rate wireless personal area network (WPAN) standard that operates on the same 2.4 GHz frequency band. • Proprietary Protocols: The processor can also support custom or proprietary wireless communication protocols as needed.
Sub-1GHz
• Chip: TL CC1101 • Frequency Bands Supported: • 300-348 MHz • 387-464 MHz • 779-928 MHz
SMA Input - External Antenna
• SMA Female Socket: A standard RF connector that supports frequencies from 300 MHz to 928 MHz, commonly used for RF and wireless communication applications.
Infrared
• TX/RX Range: Infrared operates within the range of 800-950 nanometers (nm). This is the wavelength range at which IR signals are transmitted and received. • TX Power: The transmitter (TX) power for Infrared is typically around 300 milliwatts (mW). This power level is used to transmit IR signals over short distances.
GPIO
• Input: 3.3V • Output: 5V • TolerantMax Current: Up to 20mA per digital pin
NFC
• Frequency: 13.56 MHz • Supported Interfaces: ISO/IEC 14443, FeliCa, MIFARE Classic, Ultralight, NTAK, DESFire, etc. • PAN (Europay, Mastercard, Visa)
RFID
• Frequency: 125 kHz • Modulation: AM, ASK, PSK, FSK • Supported Cards: EM400x, EM 410x, EM420x, HID Prox, Indala, TK4100, HITAG
Micro SD
• Maximum Capacity: The device can support external memory cards with a maximum capacity of up to 512 gigabytes (GB). This allows for ample storage space for data and applications. • Recommended Capacity: While the maximum capacity is 512GB, it is recommended to use memory cards with a capacity ranging from 1 GB to 256GB. This range is often ideal for optimal performance and compatibility. • Interface Type: The memory card interface is SPI (Serial Peripheral Interface), which is commonly used for communication between microcontrollers and external devices. • Read/Write Speed: The device is capable of achieving read and write speeds of up to 5 megabits per second (Mbps), making it suitable for efficient data transfer and storage operations.
USB-C
• Connector type: Type-C • Standard: USB 2.0 • Data transfer speed: 12 Mbps • Maximum charging current: 1 A
Sound (Buzzer)
•Frequency: 2.7 kHz • Sound Output: 85 dBA • Type: Square
Vibration Motor
• Speed: 13,000 ± 2,500 RPM • Force Value: 0.55G
Last updated